优选横截锯suppercut-100

 

pdf版本技术参数下载:技术参数suppercut-100

加工尺寸 Timber lengths to be machined:

进料长度 Ingoing lengths min./max. 300mm –无限制

进料宽度Ingoing widths min./max. 20 – 150 mm

进料厚度Ingoing thicknesses min./max. 12- 80 mm

木材横截面Cross sections max. (450mm锯片) 100 x65 mm

max. 160 x 50 mm

max. (500mm锯片) 120*75mm

max. 180*50mm

尾部截出固定长度Fixed length at rear of saw min. 80 mm

板材弯度(各个方向) Bend of the boards in all directions max. 10 mm / m

厚度公差Thickness tolerance +/- 3 mm

锯切公差Cutting tolerance +/- 1mm – +/- 2 mm

(在木材表面平滑和较少树脂的情况下,最小公差相对于固定长度1米以内 , 最大公差相对于固定长度2.5米以内) (at a timber quality with a minimum share of resin and plane surface. min. tolerance for fixed lengths up to 1 m max. tolerance for fixed lengths up to 2.5m)

材种Timber species: 软木或硬木Soft-/Hardwood

加工能力Capacity:

进料速度(无级变速)Feed speed infinitely adjustable max. 100 m/min.

锯切过程 Cutting cycle 0.15-0.3 秒

工作台高度Working height 900 mm

装机容量 Connected loads:

锯轴转速Saw spindle motor 4500rpm

电机功率Electric connected load approx. 12 kW

电压Operating voltage 380 Volt / 50 Hz (C/s)

电压波动Voltage variations max. 5 %

压缩空气Air consumption approx. 1200 NL/min.

生产压力Service pressure approx. 8 bar

压缩空气接口直径Interface diameter of air consumption ducts 12mm

吸尘风速Exhaust speed approx. 25 米/秒

吸尘管直径Diameter of dust exhaust ducts 120mm(1个), 120mm(1个)

基本色Basic colour 灰Grey RAL 7035 蓝Blue RAL 5030

客户需配置 To be provided locally:

  1. 连接电器柜的电源 Electric power supply to switch cabinet

 

  1. 稳定的供电(电压波动最大5%)Constant power supply (voltage deviations max 5%)

 

  1. 排尘系统(风速25m/sec) Dust exhaust system (V = 25m/sec)

吸尘管直径Diameter of dust exhaust ducts 120mm(1个),120mm(1个)

  1. 设备各个单元的压缩空气连接 Air connections to different machine units (8 bar)

 

  1. 电缆及排尘管 Cable ducts

 

  1. 熟练的操作和维修人员 Skilled operation and maintenance personnel

 

  1. 必要的平台、楼梯及舷梯等 Platforms, stairs, gangways if necessary

项目 ITEMS:

Item 1 进料及缺陷标识工作台,驱动式,侧面支撑台面可安置两个操作工,2.5米长。 Infeed- and marking station, driven, with lateral supporting tables for 2 markers, length 5 m.
Item 2 Item 3 Item 4 电控柜冷却装置 Cooling device for cabinet 锯轴电机采用德国原装西门子电机,抬锯和进料采用日本原装进口富士伺服电机。 Saw spindle motor is equipped by Germany Siemens motor. Infeeding & sawblade up motors are equipped by Japanese Fuji servo motors. 主机内部上压轮数量:6个;下传送轮数量:6个;传送轴采用40烙调制。 Number of upper pressure wheel:6. Number of down feeding rollers:6. The material of drive shafts assembly are 40Cr.
Item 5 优选横截锯SupperCut 100, 包括1枚锯片,直径405mm, 内置废料吹落装置,锯机内上压轮电动调节高度,带触屏。 Optimizing cross-cut saw SupperCut 100 incl. 1pc. Sawblade Electrical height adjustment of the top pressure roller in the saw, with touch switch
Item 6 到达锯机的传送带,由独立的伺服电机驱动。 Conveyor belt to cross-cut saw driven by servo motor independently.
Item 7 出料传送带,2.5米长(分类区),带驱动装置,不带顶料器。 Outfeed conveyor belt / sorting station with drive unit, without ejectors. Belt length2.5m
Item 8 客户现场安装调试、培训和初始运行 Installation, training and commissioning